Best Conduit Bender for Electricians

Pipe bending is an indispensable skill for every electrician. It can be a source of frustration, even bordering on madness, at times. I want to introduce you to the best conduit bender for electricians that will help make the job easier.

If you’re determined to enhance your pipe bending skills, the Hoppy Bender from Rack-A-Tiers might just become your secret weapon and is what we consider the best conduit bender for electricians. In this article, we dive into how this tool can genuinely transform your conduit bending game.

As someone who’s been bending conduit for years, I understand the struggles firsthand. The Hoppy Bender has, without a doubt, changed the way I approach this task. To give you a glimpse of its capabilities, check out the video below for a brief introduction and a quick tutorial on using the Hoppy Bender effectively.

Before we delve further into this game-changing tool, it’s important to note that I received the Hoppy Bender from Rack-A-Tiers as a gift without any strings attached. However, keep reading because I’ve got something special in store for you—a unique code that’ll grant you a 10% discount at rackatiers.com.

If you make a purchase, as an affiliate I may earn a small commission at no extra cost to you.

Best Conduit Bender

Throughout my over a quarter-century career, I’ve yet to encounter a conduit bender that outshines the Hoppy Bender by Rack-A-Tiers. Therefore, I consider it the best conduit bender for electricians as I mentioned before!

For a look at the best electrician tools that I recommend, I’ve compiled a list for apprentice through master electrician tools.

Regardless of your experience level as an electrician, achieving precise bends takes time and effort.

Here’s a little secret: The Hoppy Bender boasts a unique “stop arm” that halts your bends at the exact angle you need, be it 30°, 45°, 90°, or any other. With this feature, you can make precise bends without constantly checking your progress. Wondering how to bend pipe faster and with more accuracy? The Hoppy Bender is the answer.

Hoppy Bender by Rack-A-Tiers

How to Bend Pipe Faster & More Accurate

I find myself wishing I had started using the Hoppy Bender sooner.

In the video below, I’ll demonstrate its operation and share why I’ve come to rely on it. Be sure to stick around until the end because I tell you about the quick formulas it comes with for offsets and saddles.

As you can see in the video, the stop arm makes all the difference. Align the arrow with the desired bend degree on the shoe, tighten it down, and you’re good to go.

As you bend, the stop arm prevents over-bending and gives a reassuring click when you reach the correct angle. You can practically bend with your eyes closed!

As you can see in the video above, this magical stop-arm makes all the difference. Just use the arrow to line up the arm to the degree of bend you need indicated on the shoe, tighten the screw, and you’re set.

Hoppy Bender arm with arrow alignment
Electrician using the Hoppy Bender to bend 1/2" EMC

Bending Formulas at Your Fingertips

The Hoppy Bender includes a pamphlet with common formulas and instructions for offsets and saddles. Additionally, there’s a handy label on the handle. The reverse side of the shoe features additional numbers to assist with your bends. This tool not only makes bending more precise but also simplifies the calculation process.

Pamphet with bend information for the Hoppy Bender for electricians
Helpful Pamphlet Included with your Hoppy Bender
Quick bending info for the Hoppy Bender
Close-up of bending formulas
Label of bend info on Hoppy Bender
Label on the handle of the Hoppy Bender
Reverse markings on Hoppy Bender
Notch side of the Hoppy Bender

Unlocking a Discount at Rack-A-Tiers

Now, for the part you’ve been waiting for—I have an exclusive code that will grant you a 10% discount when purchasing your very own Hoppy Bender. But here’s the bonus: this code isn’t limited to just the Hoppy Bender; you can use it for other tools as well.

Rack-A-Tiers is truly a paradise for electricians, with a range of innovative items that can make your work easier and more efficient.

Without further ado, here’s the code for your 10% discount: AskTheElectricalGuy10

You can find their catalog at Rack-A-Tiers.

Parting Thoughts

Get your hands on both the 1/2″ and 3/4″ Hoppy Bender. Here at Ask the Electrical Guy, we consider The Hoppy Bender the best conduit bender. They do go out of stock at times, so when available, get one!

You will have more precise bends at a fraction of the time.

While the Hoppy Bender may have a higher upfront cost compared to traditional benders, it’s an investment that will pay off in no time due to the significant time savings it offers.

Remember, the key to mastering pipe bending lies in having the right tools, and the Hoppy Bender could be the tool that takes your skills to the next level.